Skip to content

As an Amazon Associate I earn from qualifying purchases.

Hard Water Mapwaterhardnessbycity.com
Menu

Softener size calculator

A planning estimate for a salt-based whole-house softener. It uses household size and hardness. It does not know your iron, your pipe size, or how much water you actually use.

Grains per day
2,138
Grains per week
14,967
With 25% reserve
19,956

Look at a softener rated at least 24,000 grains.

Arithmetic: 4 people × 75 gallons a day × 7.1 gpg = 2,138 grains a day. × 7 days = 14,967 grains between regenerations. Divided by 0.75 so the weekly load is about 75% of the nominal rating. The 75 gallons, the 7 days, and the reserve are planning assumptions, not measurements of your house. Iron, flow rate, and the salt dose change the real size.

Convert mg/L to grains

Questions people ask

How is the softener size calculated?

People times 75 gallons a day times hardness in grains per gallon is grains per day. Times 7 is grains between regenerations. That weekly number is divided by 0.75 so the load is about 75 percent of the nominal grain rating, then rounded up to 24,000, 32,000, 40,000, 48,000, 64,000, or 80,000 grains. The 75 gallons, the 7 days, and the reserve are planning assumptions, not measurements.

Does this replace a water test?

No. If you opened this from a city page, the hardness starts at that page's monitoring median. Test the tap before you buy, because treatment can change the number.