Skip to content

As an Amazon Associate I earn from qualifying purchases.

Hard Water Mapwaterhardnessbycity.com
Menu

Water hardness in Merrimack County, New Hampshire

Merrimack County, New Hampshire has a median hardness of 14.1 mg/L (0.8 grains per gallon), rated soft on the USGS scale, from 12 monitoring locations and 110 samples collected from 2016 to 2022. It is softer than the New Hampshire median of 21.9 mg/L and softer than the national median of 120.0 mg/L.

14.1 mg/L · 0.8 gpg · Soft

12 monitoring locations · 110 samples · 2016–2022

Soft
Moderately hard
Hard
Very hard
0–60 mg/L
61–120 mg/L
121–180 mg/L
More than 180 mg/L

Marker: 14.1 mg/L (0.8 gpg), soft.

Of those locations, 3 wells and 9 surface-water sites. Every location in this median had a total-hardness result (or a blank fraction kept with the total results).

Method: median of monitoring-location medians for Hardness, Ca, Mg, reported in mg/L as CaCO3. 110 samples at 12 locations, 2016–2022. Grains per gallon use 14.1 ÷ 17.118. Sources and the full method.

Cities mapped to Merrimack

What this hardness does

Appliances

At 14.1 mg/L (0.8 gpg), scale is unlikely in a water heater, kettle, or dishwasher in Merrimack County. Soap should lather without a thick film.

Skin and hair

Skin and hair rinsed in soft water usually do not get the mineral film that hard water leaves behind. A shower filter here is about chlorine, not hardness.

Is a softener worth it?

A salt softener is usually not worth the salt, water, and upkeep at 0.8 gpg. Test the tap first. If the strip is soft, spend the money elsewhere.

These samples are wells, springs, and fresh surface water reported to the Water Quality Portal. They are not a promise about the finished water at a kitchen tap. A utility can blend sources or soften before delivery.

Matching picks

These picks match a soft rating at 14.1 mg/L in Merrimack County. They are not ranked by reviews or price.

Shower filter

Aquasana shower filter

Shower-arm filter for the water you stand under.

A shower filter is not a water softener. Carbon and KDF media are aimed at chlorine and some metals. They do not take out the calcium and magnesium measured on this page.

Check price on Amazon

Test strips

JNW hardness test strips

Strips for checking hardness at a faucet, including water downstream of a softener.

The number on this page is a median of monitoring samples. A test strip is how you see whether the tap in the house matches it.

Check price on Amazon

Open the softener size calculator with this hardness filled in: 14.1 mg/L.

Nearby counties

Questions people ask

How hard is the water in Merrimack County, New Hampshire?

Merrimack County, New Hampshire has a median hardness of 14.1 mg/L (0.8 grains per gallon), rated soft on the USGS scale, from 12 monitoring locations and 110 samples collected from 2016 to 2022. It is softer than the New Hampshire median of 21.9 mg/L and softer than the national median of 120.0 mg/L.

Is this the tap water?

No. The 14.1 mg/L figure is the median of monitoring-location medians in Merrimack County, mostly wells, springs, and fresh surface water. A utility can blend or treat water before it reaches a house. A hardness test strip is the check at the faucet.

Does Merrimack County need a water softener?

A salt softener is usually not worth the salt, water, and upkeep at 0.8 gpg. Test the tap first. If the strip is soft, spend the money elsewhere.

How was this number calculated?

Method: median of monitoring-location medians for Hardness, Ca, Mg, reported in mg/L as CaCO3. 110 samples at 12 locations, 2016–2022. Grains per gallon use 14.1 ÷ 17.118. The minimum for a county page is 3 locations and 8 samples. Retrieved 2026-11-19.