Skip to content

As an Amazon Associate I earn from qualifying purchases.

Hard Water Mapwaterhardnessbycity.com
Menu

Water hardness in Beaverhead County, Montana

Beaverhead County, Montana has a median hardness of 116.8 mg/L (6.8 grains per gallon), rated moderately hard on the USGS scale, from 124 monitoring locations and 571 samples collected from 2016 to 2026. It is softer than the Montana median of 343.0 mg/L and about the same as the national median of 120.0 mg/L.

116.8 mg/L · 6.8 gpg · Moderately hard

124 monitoring locations · 571 samples · 2016–2026

Soft
Moderately hard
Hard
Very hard
0–60 mg/L
61–120 mg/L
121–180 mg/L
More than 180 mg/L

Marker: 116.8 mg/L (6.8 gpg), moderately hard.

Of those locations, 2 wells, 112 surface-water sites, and 10 other sites. Every location in this median had a total-hardness result (or a blank fraction kept with the total results).

Method: median of monitoring-location medians for Hardness, Ca, Mg, reported in mg/L as CaCO3. 571 samples at 124 locations, 2016–2026. Grains per gallon use 116.8 ÷ 17.118. Sources and the full method.

What this hardness does

Appliances

At 116.8 mg/L (6.8 gpg), Beaverhead County is in the range where spots on glass and a chalky film on fixtures start to show. Water heaters can collect some scale, though less than in very hard water.

Skin and hair

Some people notice tighter skin or duller hair where hardness is around 6.8 gpg. A shower filter can change chlorine odor, but it does not remove the hardness itself.

Is a softener worth it?

A softener is optional at 6.8 gpg. Households that already see spots often start with a dishwasher descaler and a tap test, then add a softener if the strip stays in this range.

These samples are wells, springs, and fresh surface water reported to the Water Quality Portal. They are not a promise about the finished water at a kitchen tap. A utility can blend sources or soften before delivery.

Matching picks

These picks match a moderately hard rating at 116.8 mg/L in Beaverhead County. They are not ranked by reviews or price.

Water softener

Whirlpool 30,000-grain softener

Smaller salt-based whole-house softener with a 30,000-grain nominal capacity.

Nominal capacity: 30,000 grains

This is the smaller of the two softeners here. The calculator will say if a 30,000-grain unit is below the weekly grains for your household.

Check price on Amazon

Softener salt

Diamond Crystal softener salt

Solar-evaporated salt crystals for a salt-based ion-exchange softener.

Salt is the regenerant for a softener. It does not soften water poured through it on its own.

Check price on Amazon

Shower filter

Aquasana shower filter

Shower-arm filter for the water you stand under.

A shower filter is not a water softener. Carbon and KDF media are aimed at chlorine and some metals. They do not take out the calcium and magnesium measured on this page.

Check price on Amazon

Test strips

JNW hardness test strips

Strips for checking hardness at a faucet, including water downstream of a softener.

The number on this page is a median of monitoring samples. A test strip is how you see whether the tap in the house matches it.

Check price on Amazon

Descaler

Lemi Shine dishwasher cleaner

Citric-acid cleaner for scale and residue already inside a dishwasher.

This cleans the machine. It does not change the hardness of the water coming into the house.

Check price on Amazon

Open the softener size calculator with this hardness filled in: 116.8 mg/L.

Nearby counties

Questions people ask

How hard is the water in Beaverhead County, Montana?

Beaverhead County, Montana has a median hardness of 116.8 mg/L (6.8 grains per gallon), rated moderately hard on the USGS scale, from 124 monitoring locations and 571 samples collected from 2016 to 2026. It is softer than the Montana median of 343.0 mg/L and about the same as the national median of 120.0 mg/L.

Is this the tap water?

No. The 116.8 mg/L figure is the median of monitoring-location medians in Beaverhead County, mostly wells, springs, and fresh surface water. A utility can blend or treat water before it reaches a house. A hardness test strip is the check at the faucet.

Does Beaverhead County need a water softener?

A softener is optional at 6.8 gpg. Households that already see spots often start with a dishwasher descaler and a tap test, then add a softener if the strip stays in this range.

How was this number calculated?

Method: median of monitoring-location medians for Hardness, Ca, Mg, reported in mg/L as CaCO3. 571 samples at 124 locations, 2016–2026. Grains per gallon use 116.8 ÷ 17.118. The minimum for a county page is 3 locations and 8 samples. Retrieved 2026-11-19.