Skip to content

As an Amazon Associate I earn from qualifying purchases.

Hard Water Mapwaterhardnessbycity.com
Menu

Water hardness in Washington, District of Columbia

Samples inside Washington city limits have a median hardness of 114.0 mg/L (6.7 grains per gallon), rated moderately hard on the USGS scale, from 18 monitoring locations and 21 samples collected from 2016 to 2016. It is about the same as the District of Columbia median of 114.0 mg/L and softer than the national median of 120.0 mg/L. The boundary is the Census Bureau's simplified 2023 place polygon, so a site near the edge can fall on the wrong side of the line.

114.0 mg/L · 6.7 gpg · Moderately hard

18 monitoring locations · 21 samples · 2016–2016

Soft
Moderately hard
Hard
Very hard
0–60 mg/L
61–120 mg/L
121–180 mg/L
More than 180 mg/L

Marker: 114.0 mg/L (6.7 gpg), moderately hard.

Of those locations, 18 wells. Every location in this median had a total-hardness result (or a blank fraction kept with the total results).

Method: median of monitoring-location medians for Hardness, Ca, Mg, reported in mg/L as CaCO3. 21 samples at 18 locations, 2016–2016. Grains per gallon use 114.0 ÷ 17.118. Sources and the full method.

Counties under Washington

Shares are a grid sample of the 2023 Census place polygon against county polygons, not a population census of each block. Washington city had an estimated population of 702,250 in 2024.

CountyShare of mapped areaMedianLocationsSamples
District of Columbia100%114.0 mg/L · Moderately hard2023

What this hardness does

Appliances

At 114.0 mg/L (6.7 gpg), Washington is in the range where spots on glass and a chalky film on fixtures start to show. Water heaters can collect some scale, though less than in very hard water.

Skin and hair

Some people notice tighter skin or duller hair where hardness is around 6.7 gpg. A shower filter can change chlorine odor, but it does not remove the hardness itself.

Is a softener worth it?

A softener is optional at 6.7 gpg. Households that already see spots often start with a dishwasher descaler and a tap test, then add a softener if the strip stays in this range.

These samples are wells, springs, and fresh surface water reported to the Water Quality Portal. They are not a promise about the finished water at a kitchen tap. A utility can blend sources or soften before delivery.

Matching picks

These picks match a moderately hard rating at 114.0 mg/L. The source is samples inside Washington city limits.

Water softener

Whirlpool 30,000-grain softener

Smaller salt-based whole-house softener with a 30,000-grain nominal capacity.

Nominal capacity: 30,000 grains

This is the smaller of the two softeners here. The calculator will say if a 30,000-grain unit is below the weekly grains for your household.

Check price on Amazon

Softener salt

Diamond Crystal softener salt

Solar-evaporated salt crystals for a salt-based ion-exchange softener.

Salt is the regenerant for a softener. It does not soften water poured through it on its own.

Check price on Amazon

Shower filter

Aquasana shower filter

Shower-arm filter for the water you stand under.

A shower filter is not a water softener. Carbon and KDF media are aimed at chlorine and some metals. They do not take out the calcium and magnesium measured on this page.

$67.99Price as of November 19, 2026, 9:43 AM ET. Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Check price on Amazon

Test strips

JNW hardness test strips

Strips for checking hardness at a faucet, including water downstream of a softener.

The number on this page is a median of monitoring samples. A test strip is how you see whether the tap in the house matches it.

$8.99Price as of November 19, 2026, 9:43 AM ET. Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Check price on Amazon

Descaler

Lemi Shine dishwasher cleaner

Citric-acid cleaner for scale and residue already inside a dishwasher.

This cleans the machine. It does not change the hardness of the water coming into the house.

$4.49Price as of November 19, 2026, 9:43 AM ET. Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Check price on Amazon

Open the softener size calculator with this hardness filled in: 114.0 mg/L.

Questions people ask

How hard is the water in Washington, District of Columbia?

Samples inside Washington city limits have a median hardness of 114.0 mg/L (6.7 grains per gallon), rated moderately hard on the USGS scale, from 18 monitoring locations and 21 samples collected from 2016 to 2016. It is about the same as the District of Columbia median of 114.0 mg/L and softer than the national median of 120.0 mg/L. The boundary is the Census Bureau's simplified 2023 place polygon, so a site near the edge can fall on the wrong side of the line.

Is the Washington figure from inside the city?

Yes. The median uses monitoring locations whose coordinates fall inside the Census place boundary for Washington city. It is still not a tap-water test.

Is this the water from the faucet?

Not necessarily. The portal records are environmental samples: wells, springs, and fresh surface water. A treatment plant can blend sources or soften water before it is delivered. Test the tap if you are deciding on a softener.

Should Washington get a water softener?

A softener is optional at 6.7 gpg. Households that already see spots often start with a dishwasher descaler and a tap test, then add a softener if the strip stays in this range.