Skip to content

As an Amazon Associate I earn from qualifying purchases.

Hard Water Mapwaterhardnessbycity.com
Menu

Water hardness in San Luis, Arizona

San Luis does not have enough samples inside the city limits for its own median (2 locations and 171 samples; the minimum is 3 locations and 8 samples). This page shows Yuma County, which contains about 100% of San Luis's mapped area: 377.8 mg/L (22.1 grains per gallon), rated very hard on the USGS scale, from 78 monitoring locations and 441 samples collected from 2016 to 2026. That county figure is harder than the Arizona median of 236.0 mg/L and harder than the national median of 120.0 mg/L.

377.8 mg/L · 22.1 gpg · Very hard

78 monitoring locations · 441 samples · 2016–2026

Soft
Moderately hard
Hard
Very hard
0–60 mg/L
61–120 mg/L
121–180 mg/L
More than 180 mg/L

Marker: 377.8 mg/L (22.1 gpg), very hard.

Of those locations, 42 wells and 36 surface-water sites. 37 of the locations had only dissolved hardness, so that fraction was used there. The rest use total hardness, including samples whose fraction was left blank.

Method: median of monitoring-location medians for Hardness, Ca, Mg, reported in mg/L as CaCO3. 441 samples at 78 locations, 2016–2026. Grains per gallon use 377.8 ÷ 17.118. Sources and the full method.

Counties under San Luis

Shares are a grid sample of the 2023 Census place polygon against county polygons, not a population census of each block. San Luis city had an estimated population of 40,064 in 2024.

CountyShare of mapped areaMedianLocationsSamples
Yuma County100%377.8 mg/L · Very hard78441

What this hardness does

Appliances

At 377.8 mg/L (22.1 gpg), scale builds quickly on heating elements and fixtures in San Luis, and dishwashers often spot glass. Soap and detergent are partly used up by the minerals before they clean.

Skin and hair

Very hard water at 22.1 gpg commonly leaves soap scum on skin and hair. People often describe the rinse as filmy. Softened water feels slippery because the minerals are gone, which is easy to mistake for soap that has not rinsed off.

Is a softener worth it?

At 22.1 gpg, a softener is the usual way to stop scale and soap film. Confirm the faucet with a test strip, because this median is from monitoring locations, then size the unit for the household.

These samples are wells, springs, and fresh surface water reported to the Water Quality Portal. They are not a promise about the finished water at a kitchen tap. A utility can blend sources or soften before delivery.

Matching picks

These picks match a very hard rating at 377.8 mg/L. The source is Yuma County.

Water softener

Whirlpool 40,000-grain softener

Salt-based whole-house ion-exchange softener with a 40,000-grain nominal capacity.

Nominal capacity: 40,000 grains

That grain figure is the manufacturer's rating, not a measurement from this site. Use the size calculator with this page's hardness and your household before you pick a capacity.

Check price on Amazon

Softener salt

Diamond Crystal softener salt

Solar-evaporated salt crystals for a salt-based ion-exchange softener.

Salt is the regenerant for a softener. It does not soften water poured through it on its own.

Check price on Amazon

Shower filter

Aquasana shower filter

Shower-arm filter for the water you stand under.

A shower filter is not a water softener. Carbon and KDF media are aimed at chlorine and some metals. They do not take out the calcium and magnesium measured on this page.

$67.99Price as of November 19, 2026, 9:43 AM ET. Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Check price on Amazon

Test strips

JNW hardness test strips

Strips for checking hardness at a faucet, including water downstream of a softener.

The number on this page is a median of monitoring samples. A test strip is how you see whether the tap in the house matches it.

$8.99Price as of November 19, 2026, 9:43 AM ET. Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Check price on Amazon

Descaler

Lemi Shine dishwasher cleaner

Citric-acid cleaner for scale and residue already inside a dishwasher.

This cleans the machine. It does not change the hardness of the water coming into the house.

$4.49Price as of November 19, 2026, 9:43 AM ET. Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Check price on Amazon

Open the softener size calculator with this hardness filled in: 377.8 mg/L.

Other places near San Luis

Questions people ask

How hard is the water in San Luis, Arizona?

San Luis does not have enough samples inside the city limits for its own median (2 locations and 171 samples; the minimum is 3 locations and 8 samples). This page shows Yuma County, which contains about 100% of San Luis's mapped area: 377.8 mg/L (22.1 grains per gallon), rated very hard on the USGS scale, from 78 monitoring locations and 441 samples collected from 2016 to 2026. That county figure is harder than the Arizona median of 236.0 mg/L and harder than the national median of 120.0 mg/L.

Is the San Luis figure from inside the city?

No. 2 locations and 171 samples fell inside San Luis. That is below the page minimum, so the numbers you see are county medians, labeled as county medians.

Is this the water from the faucet?

Not necessarily. The portal records are environmental samples: wells, springs, and fresh surface water. A treatment plant can blend sources or soften water before it is delivered. Test the tap if you are deciding on a softener.

Should San Luis get a water softener?

At 22.1 gpg, a softener is the usual way to stop scale and soap film. Confirm the faucet with a test strip, because this median is from monitoring locations, then size the unit for the household.